Has TGE worked on military base projects?

Yes. TGE has performed PE-stamped structural engineering at 20+ military installations across the Air Force, Navy/NAVFAC, Army, and Army National Guard — including bases in 11 US states and at Kadena AFB in Okinawa, Japan.

Can TGE provide PE-stamped drawings for federal projects in any state?

Yes. TGE holds 49 PE licenses covering all 50 US states, DC, and territories. We can provide PE-stamped structural drawings for federal projects anywhere in the country without delays from out-of-state licensing.

Does TGE do structural assessments following damage events at military facilities?

Yes. TGE has performed on-site structural evaluations at military installations following damage events including crane collapse and impact damage. We provide PE-stamped assessment letters and repair recommendations, often with rapid turnaround. Our Eglin AFB assessment — on-site within 24 hours of a crane falling on a building — is one example.

Is TGE familiar with UFC (Unified Facilities Criteria) standards?

TGE engineers have familiarity with UFC standards governing DoD facility design, including UFC 3-301-01 (General Building Requirements). Our work at military installations has given us direct exposure to DoD construction requirements and federal project processes.

Can TGE support federal facility structural assessments and repairs?

Yes. TGE provides structural assessments and PE-stamped repair engineering for federal facilities following damage from impacts, storms, fire, and other events — including repair recommendations and EOR services for contractor use.

Does TGE work directly with federal agencies or through prime contractors?

Both. TGE has provided structural engineering on military installation projects both as a subcontractor to prime contractors and through direct engagement. Our nationwide licensure makes us a flexible partner for any federal procurement structure.

Has TGE worked on military base projects?

Yes. TGE has performed PE-stamped structural engineering at 20+ military installations across the Air Force, Navy/NAVFAC, Army, and Army National Guard — including bases in 11 US states and at Kadena AFB in Okinawa, Japan.

Can TGE provide PE-stamped drawings for federal projects in any state?

Yes. TGE holds 49 PE licenses covering all 50 US states, DC, and territories. We can provide PE-stamped structural drawings for federal projects anywhere in the country without delays from out-of-state licensing.

Does TGE do structural assessments following damage events at military facilities?

Yes. TGE has performed on-site structural evaluations at military installations following damage events including crane collapse and impact damage. We provide PE-stamped assessment letters and repair recommendations, often with rapid turnaround. Our Eglin AFB assessment — on-site within 24 hours of a crane falling on a building — is one example.

Is TGE familiar with UFC (Unified Facilities Criteria) standards?

TGE engineers have familiarity with UFC standards governing DoD facility design, including UFC 3-301-01 (General Building Requirements). Our work at military installations has given us direct exposure to DoD construction requirements and federal project processes.

Can TGE support federal facility structural assessments and repairs?

Yes. TGE provides structural assessments and PE-stamped repair engineering for federal facilities following damage from impacts, storms, fire, and other events — including repair recommendations and EOR services for contractor use.

Does TGE work directly with federal agencies or through prime contractors?

Both. TGE has provided structural engineering on military installation projects both as a subcontractor to prime contractors and through direct engagement. Our nationwide licensure makes us a flexible partner for any federal procurement structure.

FEDERAL & DOD STRUCTURAL ENGINEERING

Structural Engineering for
Federal & Military Facilities

Nationwide PE licensure. Proven at 20+ military installations across four branches.
PE-stamped work delivered on federal schedules. Serving federal projects at installations nationwide — including Eglin AFB, Edwards AFB, Vandenberg AFB, Camp Lejeune, Fort Polk, Kadena AFB, and more.

REQUEST A FEDERAL QUOTE

VIEW OUR INSTALLATIONS

NAICS Code

541330

SAM UEI

P2M3FCNV4BC5

CAGE Code

96W55

Business Status

Small Business

Professional Affiliation

SAME Member

USACE Certification

CQM-C / QCM

DOWNLOAD CAPABILITIES STATEMENT

49

PE Licenses — All 50 States & Territories

5

SE licenses in CA, HI, ID, IL, and OR for seismic-critical federal work

24,000+

Projects Since 2003

20+

Military Installations — 4 Branches

WHAT WE DO

Federal Structural Engineering Services

TGE provides PE-stamped structural engineering at DoD installations and federal facilities —

from rapid-response damage assessments to repair engineering and new facility support.

STRUCTURAL ASSESSMENTS AT MILITARY FACILITIES

On-site structural evaluations at DoD installations following damage events — crane collapse, vehicle impact, storm damage, fire — with PE-stamped findings and clear repair recommendations.

REPAIR & RENOVATION ENGINEERING

EOR services for federal facility repairs and modifications — PE-stamped drawings for contractor use, construction administration support, and documentation that meets federal project requirements.

DOD FACILITY STRUCTURAL DESIGN

Structural engineering for new and renovated DoD facilities, with familiarity with Unified Facilities Criteria (UFC) standards governing military construction.

NAVFAC PROJECT SUPPORT

Structural engineering for Navy and Marine Corps projects through NAVFAC, including facility assessments and repair engineering at Naval installations.

MULTI-BRANCH EXPERIENCE

Projects spanning U.S. Air Force, Navy/NAVFAC, Army, and Army National Guard — across 11 US states and internationally at Kadena AFB, Okinawa, Japan.

NATIONWIDE PE COVERAGE

49 PE licenses covering all 50 states, DC, and territories. No out-of-state licensing delays — TGE can mobilize PE-stamped support to any federal installation in the country.

WHERE WE'VE WORKED

Military Installations Served

TGE has performed PE-stamped structural engineering across four branches of the US military — spanning 11 states and internationally. TGE has supported federal projects in Florida, California, New Mexico, Colorado, Massachusetts, Nebraska, Idaho, Michigan, North Carolina, Louisiana, and Texas — plus internationally at Kadena AFB, Japan.

U.S. AIR FORCE / ANG

Eglin AFB, FL — structural evaluation, crane impact
Tyndall AFB, FL — multiple projects
Edwards AFB, CA — multiple projects
Vandenberg AFB, CA
Kirtland AFB, NM
Cannon AFB, NM — multiple projects
Schriever AFB, CO
Hanscom AFB, MA
Offutt AFB, NE — shooting range
Mountain Home AFB, ID — commissary, structural investigation, facility evaluation
Gowen Field ANG, Boise, ID — C-130 Hangar, Dorms/Education Building
Selfridge ANGB, MI — facility condition assessment
Kadena AFB, Okinawa, Japan

U.S. NAVY / NAVFAC / MARINES

MCB Camp Lejeune-New River, NC — Verona Loop Marine Mart
Camp Devil Dog (MCB Pendleton), CA — Mini Mart, NAVFAC
Naval Base Ventura County, Point Mugu, CA — Seismic retrofit, Building PM-57
FBI Academy, Quantico, VA — Shooting Range

U.S. ARMY / USACE

Fort Polk, LA — facility assessment, barracks QA, DFAC ground-up QA, training city QA
Army Reserve Center, Denton, TX — ground-up build QA
Fort Worth, TX — BUILDER Train the Trainer, Military Base Energy Calculator
Fort Hood, TX — Energy Calculator Development, USACE/DoD
Camp Grayling, MI — Army National Guard

CURRENT END USERS

WHY TGE

Built for Federal Work

Federal projects demand licensure, experience, and reliability across state lines. TGE delivers all three.

49 PE LICENSES NATIONWIDE

All 50 US states, DC, and territories covered. No delays waiting on out-of-state licensing for any federal installation.

20+ MILITARY INSTALLATIONS

Structural work across Air Force, Navy, Army, and National Guard facilities in 11 states and internationally.

5 SE LICENSES

Structural Engineer licenses in CA, HI, ID, IL, and OR for seismic-critical federal and DoD work.

24,000+ PROJECTS COMPLETED

Operating since 2003 across manufacturing, commercial, modular, public, facilities, and federal sectors.

REGISTERED IN SAM.GOV

Active SAM registration (UEI: P2M3FCNV4BC5, CAGE: 96W55) — ready for federal contracting and procurement at any DoD or civilian agency.

CERTIFICATIONS & AFFILIATIONS

USACE CQM-C certified (Will Workman, P.E.). BUILDER Train the Trainer certified. Society of American Military Engineers member — Gem State Post.

Frequently asked questions

Federal Engineering FAQ

THE TAMARACK GROVE DIFFERENCE

OVERALL DEPTH OF EXPERTISE AND RESOURCES

PROTOTYPE DEVELOPMENT/IMPROVEMENTS

INNOVATIVE, RIGHT-SIZE SOLUTIONS

RESPONSIVENESS

FASTER THAN AVERAGE TURN-AROUND TIMES

LICENSURE THROUGHOUT NORTH AMERICA

Let's talk! Contact Will Workman, P.E., Federal Market Sector Leader, today to experience the Tamarack Grove difference.

EMAIL WILL

Key Team Members

BRIAN SIELAFF, M.S.C.E., S.E., P.E., P. ENG. CEO

DOUG HARDIN, P.E. President

WILL WORKMAN, P.E. Engineering Manager

Learn more about how Tamarack has helped our clients solve their challenges and achieve their goals.

READ OUR CONTENT

Structural Engineering for Federal & Military Facilities

Nationwide PE licensure. Proven at 20+ military installations across four branches. PE-stamped work delivered on federal schedules. Serving federal projects at installations nationwide — including Eglin AFB, Edwards AFB, Vandenberg AFB, Camp Lejeune, Fort Polk, Kadena AFB, and more.

NAICS Code

541330

SAM UEI

P2M3FCNV4BC5

CAGE Code

96W55

Business Status

Small Business

Professional Affiliation

SAME Member

USACE Certification

CQM-C / QCM

49

5

24,000+

20+

Federal Structural Engineering Services

STRUCTURAL ASSESSMENTS AT MILITARY FACILITIES

REPAIR & RENOVATION ENGINEERING

DOD FACILITY STRUCTURAL DESIGN

NAVFAC PROJECT SUPPORT

MULTI-BRANCH EXPERIENCE

NATIONWIDE PE COVERAGE

Military Installations Served

U.S. AIR FORCE / ANG

U.S. NAVY / NAVFAC / MARINES

U.S. ARMY / USACE

CURRENT END USERS

Built for Federal Work

49 PE LICENSES NATIONWIDE

20+ MILITARY INSTALLATIONS

5 SE LICENSES

24,000+ PROJECTS COMPLETED

REGISTERED IN SAM.GOV

CERTIFICATIONS & AFFILIATIONS

Frequently asked questions

Has TGE worked on military base projects?

Can TGE provide PE-stamped drawings for federal projects in any state?

Does TGE do structural assessments following damage events at military facilities?

Is TGE familiar with UFC (Unified Facilities Criteria) standards?

Can TGE support federal facility structural assessments and repairs?

Does TGE work directly with federal agencies or through prime contractors?

THE TAMARACK GROVE DIFFERENCE

Let's talk! Contact Will Workman, P.E., Federal Market Sector Leader, today to experience the Tamarack Grove difference.

Key Team Members

CONTACT US

HOME ABOUT US MEET THE TEAM COMMERCIAL MANUFACTURING FACILITIES CONTENT CAREERS CONTACT

Structural Engineering for
Federal & Military Facilities

Nationwide PE licensure. Proven at 20+ military installations across four branches.
PE-stamped work delivered on federal schedules. Serving federal projects at installations nationwide — including Eglin AFB, Edwards AFB, Vandenberg AFB, Camp Lejeune, Fort Polk, Kadena AFB, and more.

HOME
ABOUT US
MEET THE TEAM
COMMERCIAL
MANUFACTURING
FACILITIES
CONTENT
CAREERS
CONTACT